Natural Wall Stacked stone Ledger panels, / Ledge Stone Veneer- Corner - Thin Stone - Thickness 3/8"-5/8" - Alaska White - 6" X 16" X 8"

Natural Wall Stacked stone Ledger panels, / Ledge Stone Veneer- Corner - Thin Stone - Thickness 3/8"-5/8" - Alaska White - 6" X 16" X 8"

Availability: In stock
SKU
TSAL-C
Natural Wall Stacked stone Ledger panels, / Ledge Stone Veneer- Corner - Thin Stone - Thickness 3/8"-5/8" - Alaska White - 6" X 16" X 8" is available to buy in increments of 504
More Information
Qty/pc 504
Pallet Q/Per Unit 7
Unit PC
Size (LxWxT) Thickness 3/8"-5/8" - Alaska White - 6" X 16" X 8"

Installation Instructions for Natural Thin Stone Veneer

  1. To be installed on a substrate that is structurally sound and clean (cement block wall or cement board attached to a wall).
  2. Panels are designed to interlock for a seamless fit.
  3. Apply ½” - ¾” of quality mortar on your wall in a length and height that is bigger than panel size.
  4. Apply a thin layer of mortar on the back of your panel and press firmly in place.
  5. Use white rubber mallet to tap on each panel to ensure strong bond and keep panels leveled.
  6. Install your panels from the bottom of the wall upward adding panels horizontally in a linear direction.
  7. Create multiple layers of panels until reaching your desired height.
  8. You may use stone sealer to protect stone from stains and enhance the color of your project.